By default, plug your output cable into the Left output of the mixer. Note: Many mixers have both Left and Right audio outputs for stereo, but many preamps are not stereo. Depending on which mixer you have, you will need the appropriate cable to hook into your preamp.Д¬onnect the interfaces output into the Apple device's Lightning port.

Most mixers have a section labeled 'main outputs' that are either 1/4' outputs, XLR outputs, or sometimes both. You can also connect analog mixers to your iOS device using an Interface.Д¬onnect your mixer's output into the interfaces input. It has an added benefit of being able to charge your device while using external audio.Д¬onnect external audio devices like microphones and laptops into your mixer.Д¬onnect your mixer's USB output into your iOS device using the USB input on your USB3 Camera Adapter. This is the recommended way to connect any USB mixer. If your mixer is a USB mixer you can connect it directly to the iPad using an Apple USB3 Camera Adapter. You can also connect a mixer to your iOS device for the use of multiple audio inputs. Your main switching device will now recognize the preamp and connected microphone as the main audio signal for your videos. Then connect the interface's output cable to the lightning port on your iOS device. To connect an external microphone you'll need a mobile interface such as a Saramonic SmartRig or IK Media iRigД¬onnect one end of the XLR cable to the microphone and the other end to the interface's input jack. USB: You can use an Apple USB3 Camera Adapter to connect a USB audio source such as a USB mixer or interface.

Mobile Interface: A mobile interface is an audio interface designed specifically for mobile devices that converts an external audio signal into a signal that your Apple device can recognize.ДЎ/8' (3.5mm) TRRS cable and Lightning to 3.5mm Headphone Jack Adapter: You can use Apple's Lightning to Headphone adapter to connect audio via a 3.5mm TRRS cable. Required Interfaces, Cables, and/or Adapters If your device does not have a Lightning port, you'll need to follow these instructions for using a USB-C port.

Soundboard to switcher studio